2-51 System Utilities
NOTE:
Above path is an example only.
2. On the target device, after booting to DOS using the USB disk, execute DMITOOLS.EXE to
display the usage options help.
The following examples show the commands and the corresponding output information:
1. Read Manufacturer Name from Memory
[Instruction] DMITOOLS /Rm
Figure 2-84. Read Manufacture Name
2. Read Product Name from Memory
[Instruction] DMITOOLS /Rp
Figure 2-85. Read Product Name
3. Read Serial Number from Memory
[Instruction] DMITOOLS /Rfgsn
Figure 2-86. Read Serial Number
4. Read M/B Serial Number from Memory
[Instruction] DMITOOLS /Rmbsn
Figure 2-87. Read M/B Serial Number
C:\>DMITOOLS /Rm
Manufacturer : Acer
C:\>DMITOOLS /Rp
Product Name : xxxx xx-xxx
C:\>DMITOOLS /Rfgsn
Serial Number : 01234567890123456789
C:\>DMITOOLS /Rmbsn
M/B Serial Number : 1122334455667788990
To Next Page
Loading...
