37
No Backlight
Check VDDA,ENA VDD A = 4.75 ~ 5.25 V,ENA<3V
NG
OK
Check On/Off loo
Connect Timer (Pin 3) to GND
Check ENA(pin10),OVPT(pin7),CT(pin13),
DRV1
of IC801
NG
OK
Change IC801
Check half bridge power conversion
circuit and transformer output circuit.
Check ISEN (pin 5) normally
NG
Check ISEN loo
onents
End Striking function debug
Check VSEN (pin 6) of IC801
Judge VSEN>0.7V&OVPT
Check VSEN circuit form
lamp’s return to VSEN (pin 6)
of IC801
Check pin3 voltage of D801,
D803>2W
End VSEN circuit and
protection loop debug
Check protection circui
components short ,open or fail
NG
NG
OK
OK
OK
OK
OK
OK