Acer AL1931 - 2.3 LCD Panel Specification

4
SXGA 1280 X 1024 (60/70/75 Hz) standard
resolution
Pixel pitch : 0.098x3mm(H) x 0.294mm(V)
Display Dot : 1280 x (RGB) x 1024
Pixel Clock : 25.2 – 135.0MHz
Contrast ratio: θ = 0˚ FUJITSU 500: 1, SANYO 700:1, AU 600:1 (conditions =
typical).
Brightness: FUJITSU 300 cd/m², SANYO 250 cd/m², AU 250 cd/m²
(conditions= typical).
Response time (Tr/Tf): FUJITSU:(15/10), SANYO:(19/6), AU:(15/10)(conditions
Ta=25℃).
Display color : FUJITSU: 16.7M, SANYO: 16.7M, AU: 16.7M (8 bite color)
Viewing angle: FUJITSU, SANYO, AU
L / R ≧ 85 / ≧ 85 ( ≧ 160 degrees horizontal typical)
U / D ≧ 85 / ≧ 85 ( ≧ 160 degrees vertical typical)
Luminance Uniformity : > 75 %
Pc interface: 1). Video : RGB analog 0.7V peak to peak
Sync : TTL positive or negative
2). Digital : TMDS
3). Audio : 3.5 mm stereo audio jack (Audio)
Signal connector : 15 pin Mini D type, (standard VGA video)
DVI-D connector
Audio power : 1Wrms + 1Wrms ( 300Hz – 10kHz (S.P.L. – 10 dB))
Front control : power on/off with LED select (up, down) adjustment (+,-)
Interface frequency
 Horizontal Frequency 30KHz --80KHz(analog), 31.5– 64KHz(digital)
 Vertical Frequency 56Hz ----75Hz
Plug & play : Support VESA DDC2B functions
Power Input voltage : Single phase, 50/60HZ, 100VAC to 240VAC ±10%
Total output power : 56 Watt max.
2.3 LCD Panel Specification
2.3.1 LCD Panel Model (FUJITSU FLC48SXC8V)
• Display Type active matrix color TFT LCD
• Resolution 1280 x 1024 pixels
• Display Area 376.32mm(W) x 301.056mm(H)