50 Chapter 3
11. Pull out the Blustooth antenna carefully.
12. Take out the Bluetooth antenna as picture shows.
13. Remove one screw that secures the ground cable.
.
14. Remove the two screws that secure the LCD module on one side.
15. Then remove another two screws one another side.
16. Detach the entire LCD module.
17. Remove one screw as picture shows in order to detach upper case assembly.
18. Then remove the thirteen screws on the bottom panel.
19. Remove one screw on the rear on one side.
20. Then remove another screw on another side.
21. Detach the upper case assembly carefully.
To Next Page
Loading...
