7
Removing the Optical Drive Module
1. See “Removing the Battery Pack” on page 5.
2. See “Removing the Lower Cover” on page 6.
3. Use a screw driver and carefully push out and slide out the optical drive module out of the bay.
4. Remove the one screw (B) securing the locker bracket and remove the locker bracket from the optical
disk drive module.
Removing the DIMM
1. See “Removing the Battery Pack” on page 5.
2. See “Removing the Lower Cover” on page 6.
Step Size (Quantity) Color Torque
1 M2 x L3 (1) Silver 1.6 kgf-cm
To Next Page
Loading...
