9
4. Remove the two screws (D) securing the hard disk to the bracket and remove the hard disk from the
bracket.
Removing the SSD Module
1. See “Removing the Battery Pack” on page 5.
2. See “Removing the Lower Cover” on page 6.
3. Using the plastic tab, slide the SSD module away from the connector and lift to remove it from the system.
Removing the RTC Battery
1. See “Removing the Battery Pack” on page 5.
2. See “Removing the Lower Cover” on page 6.
Step Size (Quantity) Color Torque
1~2 M3 x L3 (2) Black 3.0 kgf-cm
To Next Page
Loading...
