20 Chapter 1
Front Panel LED States
State for a Single Color Power LED (Blue)
State for LAN LED (Blue)
State for a Single Color Storage LED (Blue)
System Memory
Super I/O
USB Interface
LED State Description ACPI State
Steady Blue Running S0
Blinking Blue Sleeping S1, S3
Off Power Off S4, S5
LED State Description
Controller
State
Blinking blue Active Active
Off Idle Idle
LED State Description
Controller
State
Blinking blue Active Active
Off Idle Idle
Item Specification
Feature • Dual Channel DDR2 667/533/400, Unbuffered DIMM
• Support 4 DDRII DIMM (8 GB Maximum capacity)
Item Description
Chip ITE IT8718F
Feature • Meet LPC Spec 1.1
• Compliant with Microsoft PC98/PC2001 Hardware Design Guide
• Support PS/2 Keyboard & Mouse
• Support up to four 3.5-inch or 5.25-inch floppy disk drives
• Support two serial ports, one EPP/ECP parallel port
• Support three fans (5 fan speed monitoring inputs)
• Support IrDA 1.0 FIR protocol with maximum baud rate up to 115.2K bps
• Hardware Monitor supported (External Thermal Sensor Host support)
Item Description
Chip ATI SB600
Feature • 10 USB 2.0/1.1 ports support
• Dual stack with RJ-45 back panel connector
• Dual stack with 1394 back panel connector
• 2 header supporting 4 USB ports for front panel cabling and 1 header
optional
To Next Page
Loading...
