Acer Aspire Z1650 - Page 31

Aspire Z1650 AIO Computer Service Guide 23
Save & Exit
Parameter Description
Save & Exit Setup When you have completed the system configuration changes, select this
option to leave the BIOS Setup Utility and reboot the computer, so the new
system configuration parameters can take effect. Select Save & Exit Setup
from the Exit menu and press Enter.
Discard Changes and
Exit Setup
Select this option to quit the BIOS Setup Utility without making any permanent
changes to the system configuration, and reboot the computer. Select
Discard Changes and Exit Setup from the Exit menu and press Enter.
Save Changes Select this option and press Enter to save all the changes and return to the
BIOS Setup Utility.
Discard Changes Select this option and press Enter to discard all the changes and return to the
BIOS Setup Utility.
Load Default Settings To set this feature, select Load Default Settings from the Exit menu and
press Enter. Then, select OK to allow the BIOS to automatically load optimal
defaults to the BIOS settings. The Optimal settings are designed for maximum
system performance, but may not work best for all computer applications.
Save as User Default
Settings
Select this option and press Enter to save changes that you have made as
user defaults.
Load User Default
Settings
Select this option and press Enter to restore user defaults.