50 Aspire Z1650 AIO Computer Service Guide
3. Detach the speakers from the rear cover assembly.
Removing the Mainboard
1. Remove the LCD assembly by following the procedure described on page 31.
2. Remove the WLAN module by following the procedure described on page 33.
3. Remove the ODD by following the procedure described on page 38.
4. Remove the VGA-out port by following the procedure described on page 41.
5. Remove the HDD by following the procedure described on page 42.
6. Remove the system fan by following the procedure described on page 44.
7. Remove the heat sink by following the procedure described on page 45.
8. Remove the memory modules by following the procedure described on page 46.
9. Remove the webcam cable by following the procedure described on page 47.
10. Remove the power button/LED assembly by following the procedure described on page 48.
11. Remove the speakers by following the procedure described on page 49.
12. Release the mainboard from the adhesive tapes securing it.
To Next Page
Loading...
