Aspire Z1650 AIO Computer Service Guide 85
Storage Device
Reboot and select
proper boot device or
Insert boot media in
selected boot device
BIOS could not find a bootable device in the system and/or removable
media drive does not contain media.
NO ROM BASIC This message occurs on some systems when no bootable device can be
detected.
Message Description
Primary Master Hard
Disk Error
The IDE/ATAPI device configured as Primary Master could not be properly
initialized by the BIOS. This message is typically displayed when the BIOS is
trying to detect and configure IDE/ATAPI devices in POST.
Primary Slave Hard
Disk Error
The IDE/ATAPI device configured as Primary Slave could not be properly
initialized by the BIOS. This message is typically displayed when the BIOS is
trying to detect and configure IDE/ATAPI devices in POST.
Secondary Master
Hard Disk Error
The IDE/ATAPI device configured as Secondary Master could not be properly
initialized by the BIOS. This message is typically displayed when the BIOS is
trying to detect and configure IDE/ATAPI devices in POST.
Secondary Slave Hard
Disk Error
The IDE/ATAPI device configured as Secondary Slave could not be properly
initialized by the BIOS. This message is typically displayed when the BIOS is
trying to detect and configure IDE/ATAPI devices in POST.
3rd Master Hard Disk
Error
The IDE/ATAPI device configured as Master in the 3rd IDE controller could not be
properly initialized by the BIOS. This message is typically displayed when the
BIOS is trying to detect and configure IDE/ATAPI devices in POST.
3rd Slave Hard Disk
Error
The IDE/ATAPI device configured as Slave in the 3rd IDE controller could not be
properly initialized by the BIOS. This message is typically displayed when the
BIOS is trying to detect and configure IDE/ATAPI devices in POST.
4th Master Hard Disk
Error
The IDE/ATAPI device configured as Master in the 4th IDE controller could not be
properly initialized by the BIOS. This message is typically displayed when the
BIOS is trying to detect and configure IDE/ATAPI devices in POST.
4th Slave Hard Disk
Error
The IDE/ATAPI device configured as Slave in the 4th IDE controller could not be
properly initialized by the BIOS. This message is typically displayed when the
BIOS is trying to detect and configure IDE/ATAPI devices in POST.
5th Master Hard Disk
Error
The IDE/ATAPI device configured as Master in the 5th IDE controller could not be
properly initialized by the BIOS. This message is typically displayed when the
BIOS is trying to detect and configure IDE/ATAPI devices in POST.
5th Slave Hard Disk
Error
The IDE/ATAPI device configured as Slave in the 5th IDE controller could not be
properly initialized by the BIOS. This message is typically displayed when the
BIOS is trying to detect and configure IDE/ATAPI devices in POST.
6th Master Hard Disk
Error
The IDE/ATAPI device configured as Master in the 6th IDE controller could not be
properly initialized by the BIOS. This message is typically displayed when the
BIOS is trying to detect and configure IDE/ATAPI devices in POST.
6th Slave Hard Disk
Error
The IDE/ATAPI device configured as Slave in the 6th IDE controller could not be
properly initialized by the BIOS. This message is typically displayed when the
BIOS is trying to detect and configure IDE/ATAPI devices in POST.
Primary Master Drive -
ATAPI Incompatible
The IDE/ATAPI device configured as Primary Master failed an ATAPI compatibility
test. This message is typically displayed when the BIOS is trying to detect and
configure IDE/ATAPI devices in POST.
Primary Slave Drive -
ATAPI Incompatible
The IDE/ATAPI device configured as Primary Slave failed an ATAPI compatibility
test. This message is typically displayed when the BIOS is trying to detect and
configure IDE/ATAPI devices in POST.
Message Description
To Next Page
Loading...
