Acer Aspire Z3170 - Page 20

1-14 Hardware Specifications and Configurations
2 USB 3.0 connectors
On-board connectors
1 6Pin LCD Panel Power Supply Connector
2 DDR3 SODIMM Socket
3 SATA Connector (1 reserved for optional)
1 90 Degree PCI-E x16 Slot(Support ATX Graphic Cards, single slot)
3 5x2Pin USB2.0 Header (Touch/Camera/BT)
1 14Pin Front Panel (Power SW/Power LED/HDD LED/Wifi LED)
1 4Pin CPU with SAMRT Fan Controller
1 4Pin System with Smart Fan Controller
1 2Pin digital mic-in
1 3Pin Clear CMOS Header (with jumper)
1 Digital video in for VGA card. It is used for system with VGA card and connect
video signal to MB (optional)
1 HDMI In Connector (refer to right diagram, support HDMI-in w/i Video/Audio at
PC off state)
1 HDMI output Connector (optional)
1 30Pin LVDS Out
1 24Pin (LPT/COM, optional for commercial sku)

1 4Pin SATA Power Out (HDD/ODD)
1 4Pin Speaker Connector
1 3Pin CIR header (support RC6/RCMM code table)
1 Power in (adapter proposed by ODM)
1 SPDIF-out connector (optional)
Acer Hardware spec 0
Please follow:
Acer Hardware validation request
Acer Mother Board EE Design Request
Acer VGA SI validation SOP