System Utilities 2-15
AMI UEFI BIOS Flash SOP for DOS 0
Flash UEFI BIOS SOP for DOS,
1. Please make a DOS bootable device.
2. Copy BIOS folder (ex: Boston-AAHD3-AG_D06 folder) into DOS bootable device.
3. Boot to DOS mode and enter the BIOS folder.
4. Enter to the DOS folder under BIOS folder.
5. Flash Method.
- For end-user only. Currently, all ODMs should NOT use it to flash SBIOS.
It will cause unexpected problem since some BIOS block data maybe different between old
and new BIOS.
- It will keep DMI and setup settings.
- QTC team can simulate user's behavior by using it.
1) Execute āBIOS_DOS.batā file.
To Next Page
Loading...
