ZX4450 (non-Touch)/ ZX4451 (Touch)
- If you want to Read/Write System Family in Type 1, use the CMD SF.
[Read Command] AMIDEDOS /SF
[Write Command] AMIDEDOS /SF "Gateway Desktop"
- If you want to Read/Write Baseboard ManufactureFamily in Type 2, use the CMD BM.
[Read Command] AMIDEDOS /BM
[Write Command] AMIDEDOS /BM "Gateway"
- If you want to Read/Write Baseboard Product in Type 2, use the CMD BP.
[Read Command] AMIDEDOS /BP
[Write Command] AMIDEDOS /BP "ZX4450"
Z3771 (non-Touch)/ Z3770 (Touch)
- If you want to Read/Write Classis Manufacture in Type 3, use the CMD CM.
[Read Command] AMIDEDOS /CM
[Write Command] AMIDEDOS /CM "Gateway"