Acer EI491CR - Monitor Control Interfaces

9
English
External Controls
FreeSync(HDMI/DP Only):
It can allow a FreeSync supported graphics source to dynamically adjust display
refresh rate based on typical content frame rates for power efficient, virtually stutter
free and low-latency display.
No. Icon Item Description
1 / Mode / Exit
a. Press to trigger Mode control.
b. When the OSD menu is enabled,
press to exit the current menu and go
back one level.
2 /
Brightness /
Enter
a. Press the key to open the Brightness
control.
b. When the OSD menu is enabled,
press to enter to next level.
3 / Input button/+
a. Press to toggle input sources.
b. When the OSD menu is enabled,
press to select or return to the
previous menu.
4 / OSD functions/-
a. Press to view the OSD.
b. When the OSD menu is enabled,
press to select or go to the next menu.
5 POWER Power button
Turns the monitor on/off. Blue indicates
power on.
Blinking Blue indicates standby mode.

