26
OSD Messages
Problems with the Projector
# Condition Message Reminder
1 Message
• Fan Fail - the system fan is not working.
• Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed
to cool down before it may be used. Please check the
following message.
# Condition Solution
1 The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
2 Wifi or Bluetooth cannot be
detected normally.
Plug in wifi dongle agian and restart
projector.
To Next Page
Loading...
