What to do if Acer L811 stops responding?
If the projector stops responding, turn it off, then unplug the power cord and wait at least 30 seconds before reconnecting power. Also, make sure that the control panel lock function is disabled.
Why does my Acer Projector lamp burn out?
When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced.
Guidelines for safe cleaning, power handling, and accessibility.
Guidelines for safe usage of electrical power and extension cords.
Instructions for servicing and additional safety precautions.
Precautions for listening, disposal, and laser safety.
Guide to connecting various devices and cables to the projector.
Steps to power on, off, and indicators for proper operation.
Table and guide for achieving desired image size via distance and zoom.
Using the OSD for projector installation and maintenance settings.
Navigating and using the projector's OSD menus for adjustments.
Features like BluelightShield, Dynamic Black, Display Mode, Color Profile, Wall Color.
Solutions for common PC image display issues.
Troubleshooting steps for notebook display problems and image artifacts.
Solutions for projector unresponsiveness and lamp issues.
General| Contrast Ratio | 2, 000, 000:1 |
|---|---|
| Display Technology | DLP |
| Brightness | 3000 ANSI Lumens |
| Resolution | 1920 x 1080 (Full HD) |
| Weight | 5.5 kg |
| Keystone Correction | Vertical ±30° |
| Projection Size | 80" to 120" |
| Input Ports | HDMI, USB |
To Next Page
