Acer PD310 - Menu Location; Signal Type; Lamp Reset

20
English
4
Menu Location
Choose the Menu location on the display screen.
4
Projection
 Front-Desktop
The factory default setting.
 Rear-Desktop
When you select this function, the projector reverses the image so you can project behind a
translucent screen.
 Front-Ceiling
When you select this function, the projector turns the image upside down for ceiling-
mounted projection.
 Rear-Ceiling
When you select this function, the projector reverses and turns the image upside down at
same time. You can project from behind a translucent screen with ceiling mounted
projection.
4
Signal Type
Select signal type between RGB, HDTV and Component video sources.
4
Lamp Reminding
Choose this function to show or hide the warning message when the changing lamp message
is displayed. The message will show up 30 hours before end of life.
4
Lamp Reset
Reset the lamp setting only when the new lamp is replaced.
Management
Computer / Video mode
AudioImage-I Image-II
Language Management
Menu Location
Projection
Signal Type
Lamp Reminding
Lamp Reset
RGB HDTVComponent