13 Chapter 2
No Step Procedure Photo
1 Set-up
1. Hold on “Menu” button and
plug in Power Cord while
holding on “Menu”.
2. Wait for about 5 secs.
3. Once Power, Lamp, Temp
LED lights up, plug in USB
Cable into the Projector.
(Note: The system fan will be
operated in full speed. The
light will not function as well.)
2 Set-up
Link PC USB and pro-
jector
3
Execute the “DLP
Compose(TM)
Lite 6.0”.
4
Click “Edit” and “Prefer-
ences”.
5
1. Click “Library”.
2. The library path in
the default installation
directory is
C:\Program Files\DLP
Composer Lite 6.0
If not, press “Browse” to
select the right path.
6
1. Select “Edit\Prefer
ences\Communi
cations” and choose
“USB”.
2. Click “OK”.
Firmware Upgrade Procedure
1
2
1
USB
2
OK
Vendor: 0x451
To Next Page
Loading...
Need help?
General
