29
English
Connect a monitor
To connect a monitor, simply plug the monitor cable into the DVI port
located on the rear panel of your computer. If you have a monitor that supports
S-video, plug the monitor cable to the S-video port located on the rear panel of
your computer.
Note: Refer to the monitor manual for additional instructions
and information.
Connect to a broadband network
The Gigabit Ethernet port on the rear of the computer can be used individually,
combined, or configured in a number of ways depending on your needs. With
the system’s onboard NVIDIA nForce chipset and DualNet technology, you can
combine the network port to work as one. It also allows your computer to serve
as a home gateway and it provides advanced networking features including
teaming, load balancing, fail-over, and TCP/IP acceleration.
To Next Page
Loading...
