18
English ...
The Projector has multilingual On Screen Display menus that
allow you to make image adjustments and change a variety of
settings. The projector will automatically detect the source.
How to operate
1.
To open the OSD menu, press “Menu” on the Remote Control or
Control Panel.
2.
When OSD is displayed, use keys to select any item in the
main menu. After selecting the desired main menu item, press
to enter sub menu for feature setting.
3.
Use keys to select the desired item and adjust the
settings by key.
4.
Select the next item to be adjusted in the sub menu and adjust as
described above.
5.
Press “Menu” on the Remote Control or Control Panel, the screen
will return to the main menu.
6.
To exit OSD, press “Menu” on the Remote Control or Control Panel
again. The OSD menu will close and the projector will automatically
save the new settings.
On Screen Display Menus
User Controls
Main Menu
Sub Menu settings
To Next Page
Loading...
Need help?
General
