LED Definition
The system equips one dual color (blue/amber) led to indict system status and defined as bellows:
LOGO:
When the monitor is power on, the LOGO will be showed in the center, and disappear slowly.
HOW TO OPTIMIZE THE DOS-MODE
Plug and play
Plug & play DDC2B feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows
the monitor to inform the host system of its identity and, depending on the level of DDC used,
communicate additional information about its display capabilities. The communication channel is defined
in two levels, DDC2B.
The DDC2B is a bi-directional data channel based on the I
2
C protocol. The host can request EDID
information over the DDC2B channel.
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL.
IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT
System in power-off mode Dark
System in power-saving mode
Amber
System in normal operation mode Blue
System Status LED Color
To Next Page
Loading...
