Acer V193

- 31 -
Chapter 2
Operating Instructions
CONTROLS
Control panel (monitor front panel)
1 Power LED, will be blue when monitor is on; be amber when in
power saving mode.
2 Power ON/OFF switch, push to ON and push to OFF. (toggle
switch)
3 Function change or Adjust increase.
4 Function change or Adjust decrease.
5
Menu
Function select
6
Auto
Auto adjust or Exit OSD menu.
7
e
eColor management function
Note:
1. Press button 3 (plus +) or 4 (minus -) at the same time can activate “Volume Adjustment”.
2. When OSD Menu is off, press button 6 (auto) at the same time can activate “Auto Adjustment” immediately.
3. When into Factory mode press 3 (plus +) ,4 (minus -) and 2 (power) together 2 seconds at same time.