Acer V227Q

ACER V227Q
8
S3
Disassemble the speaker
from the MF(Middle Frame)
Tear off tapes on the speaker wire.
Extract the connect of the speaker from the PCBA.
Disassemble the speaker from the MF.
S4
Disassemble the lamp wire
Extract the FFC LED from the I/F BD. Tear off the FFC LED from the SHD as picture 1.
Tear off the Mylar on the left hole of the SHD as picture 2.
Tear off the BOPP tape on the lamp wire. Extract the big connector of the lamp wire form
the P/BD as picture 3.
PICTURE 1 PICTURE 2 PICTURE 3
S5
Disassemble the Trim
Unlock two screws from the ASSY TRIM as picture 1.
Disassemble the ASSY TRIM from the MF. Disassemble the PCBA LED BD from the
ASSY TRIM as picture 2.
Disassemble FFC LED from the PCBA LED BD as picture 3
PICTURE 1 PICTURE 2 PICTURE 3
LED BD
LED BD
FFC LED
P/BD