Acer V227Q

ACER V227Q
9
S6
Disassemble the MF from
panel.
Extract FFC wire from the panel as picture 1.
Unlock 9 screws from the MF as picture 2.
Disassemble the MF from the panel. Extract the lamp wire from the panel as the
picture 3.
PICTURE 1 PICTURE 2 PICTURE 3
S7
Disassemble I/F BD and
P/BD from SHD.
Unlock 5 screws from the PCBA as the picture 1.
Disassemble the I/F BD from the SHD and extract the P/BD wire.
Extract the FFC LVDS from the I/F BD.
Disassemble the P/BD from the SHD and extract the P/BD wire from the P/BD.
Lock 2 screws as the picture 2.
PICTURE 1 PICTURE 2
NOTE: Circuit boards >10 cm² has been highlighted with the yellow rectangle as above image shows.
Please detach the Circuit boards and follow local regulations for disposal.
I/F BD
P/BD