To Next PageTo Next PageWhat does it mean if Acer V6510 lamp burns out or makes a popping sound?
When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced.
Why is the screen of my notebook computer not displaying my presentation on Acer V6510?
If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
How to fix Acer V6510 image with vertical flickering bar?
Use "Frequency" to make an adjustment. Check and reconfigure the display mode of your graphics card to make it compatible with the projector.
What to do if Acer Projector image has slanted sides?
If possible, reposition the projector so that it is centered on the screen. You can also press the "Keystone / " button on the remote control until the sides are vertical.
How to fix Acer Projector when no image appears on screen?
First, ensure the projector is connected properly. Check that none of the connector pins are bent or broken. Verify the projector lamp is securely installed. Also, confirm that you've removed the lens cap and the projector is switched on.
What to do if Acer V6510 Projector image is partial or scrolling on notebooks?
If you see a partial, scrolling, or incorrectly displayed image on your Acer Projector with notebooks, here’s what to do: * Adjust the resolution of your computer. * Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5] * If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
Why is the notebook screen not displaying my presentation on Acer V6510 Projector?
If the notebook computer screen isn't displaying your presentation when connected to the Acer Projector: * For Microsoft® Windows® notebooks: Some may deactivate their screens when a second display is used. Refer to your computer's manual for reactivation. * For Apple® Mac® OS notebooks: In System Preferences, open Display and select Video Mirroring 'On'.
Why no image appears on Acer V6510?
If you're getting no image on your Acer Projector screen, check the following: * Ensure it's connected as described in the 'Getting Started' section. * Make sure none of the connector pins are bent or broken. * Check if the projector lamp has been securely installed. * Verify that you've removed the lens cap and the projector is switched on.
How to fix partial, scrolling, or incorrectly displayed image on Acer V6510 Projector (for PC (Windows 2000/XP/Vista/ Windows 7/ Windows 8))?
For an incorrectly displayed image: Open "My Computer", open the "Control Panel", and then double-click the "Display" icon. Select the "Settings" tab. Verify that your display resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the "Advanced Properties" button. If the problem still appears, change the monitor display you are using and follow the steps below: Verify that the resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the "Change" button under the "Monitor" tab. Click "Show all devices". Next, select "Standard monitor types" under the SP box, and choose the resolution mode you need under the "Models" box. Verify that the resolution setting of the monitor display is lower than or equal to WUXGA-RB (1920 x 1200).
What to do if Acer V6510 Projector stops responding to all controls?
If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. Make sure that the control panel lock function is disabled.
General
