Acer X112 Series - Remote Control and Control Panel Layout

5
English
Remote Control and Control Panel Layout
# Icon Function Description
1 Remote control
receiver
Receives signals from remote control.
2 POWER Refer to the "Turning the Projector On/Off" section.
3 MENU
• Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
• Confirm your selection of items.
4 VGA Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
5 VIDEO Press "VIDEO" to change source to composite video. (for
X1161P/X1161PA/X112/X1261P series only)
6 S-VIDEO Press "S-VIDEO" to change source to S-Video. (for X1161P/
X1161PA/X112/X1261P series only)
7 ZOOM Zooms the projector display in or out.
8 SOURCE Changes the active source.
9 RESYNC Automatically synchronizes the projector to the input source.
10 ASPECT RATIO To choose the desired aspect ratio (Auto/4:3/16:9).
11
FREEZE To pause the screen image.
2
2
14
7
1
8
12
13
3
9
11
10
15
16
4
5
6