To Next PageTo Next PageHow to fix out of focus image on Acer X1129HP?
To correct an out-of-focus image on your Acer projector: * Adjust the focus ring on the projector lens. * Ensure the projection screen is within the required distance.
How to fix slanted sides on Acer Projector image?
To fix slanted sides on the Acer projector image: * Try to center the projector on the screen, positioning it below the screen's bottom edge. * Use the Keystone correction keys on the control panel or remote to square the image. * Access the OSD menu by pressing 'MENU'. Then, go to 'Image' > 'Auto Keystone' or 'Image' > 'Manual Keystone' to adjust the image.
Why does my Acer X1129HP Projector lamp burn out or make a popping sound?
If the Acer projector lamp burns out or makes a popping sound, it means the lamp has reached the end of its life. The projector will not turn on until you replace the lamp module. Contact your local dealer or an Acer service center to replace the lamp.
What to do if Acer X1129HP Projector image is too small or too large?
To adjust the image size on your Acer Projector, use the zoom lever on the top of the projector. You can also move the projector closer to or further from the screen. Alternatively, press "MENU" on the control panel or remote, go to "Image" > "Aspect Ratio", and try different settings.
Why is my notebook computer screen not displaying on Acer X1129HP?
If the screen of your notebook computer is not displaying your presentation on the Acer projector: * For Microsoft® Windows® notebooks: Some PCs deactivate their screens when a second display is used. Refer to your computer's manual for reactivation instructions. * For Apple® Mac® OS notebooks: Open Display in System Preferences and turn Video Mirroring 'On.'
What to do if no image appears on Acer Projector?
If no image appears on the screen when using the Acer projector: * Ensure all cables are correctly connected as described in the 'Getting Started' section. * Check that none of the connector pins are bent or broken. * Verify that the projector is switched on.
General
