38 Chapter 2
Win Flash Utility
Perform the following steps to use the WinFlash Utility:
1. Open the Start menu and type CMD to open command mode.
2. Type “fbbwin64” to flash BIOS. The process will start automatically.
IMPORTANT:During the flash process the keyboard and mouse will not function.
3. Once the flash process has finished, shutdown the system and press the power button to restart.
4. When the system boots, then it will display "Press Del to Enter BIOS Setup" and "Press F1 to Continue".
5. Press F1 to load the CMOS defaults or press Del to go BIOS SETUP and manually configure BIOS.
To Next Page
Loading...
