ACM 200 Series - PRODUCT INFORMATION; TRANSMITTER; FACTORY SETTINGS

AMC-200 Transmitter
iv
2 PRODUCT INFORMATION
2.1 TRANSMITTER
Sensor/transmitter Unit Order Number ……………………….
Transmitter Part Number ………………………………………..
Transmitter Serial Number ………………………………………
Sensor Part Number …………………………………………….
Sensor Serial Number …………………………………………..
Power Supply Requirement ……………………………………. 12 to 30 VDC @ 20 mA
2.2 FACTORY SETTINGS
Gas Type ………………………………………………………….
Range ………….………………………………………………….
Zero Gas, at 4 mA signal ………………………………………..
Gas Concentration at 20 mA signal ……………………………
Note:
All Armstrong Monitoring systems must be installed and maintained according to
instructions, to ensure proper operation. Only qualified technicians should install and
maintain the equipment.