ACMER P2 - LaserGRBL Air Assist Setup

10.2.2 LaserGRBL Control
①Move your mouse to the blank area at the bottom right of the interface, then
right-click and select "import custom buttons".
②Select the "CustomButtons" file from the "Software" folder in the TF card.
③The air pump is controlled by clicking the "Air Pump" button.
01 02
03 04
05 06
07 08
09 10
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
33 34