En
Getting Started
Before testing, read the instructions carefully and learn about all the
®
components of your On Call Advanced Blood Glucose Monitoring
®
System. Depending on the On Call Advanced product you purchase,
some of the components may need to be purchased separately. Please
check the list of contents on the outer box for details on which
components are included with your purchase.
Component DescriptionsComponent Descriptions
1. Blood Glucose Meter: Reads the test strips and displays the blood
glucose concentration.
2. Test Strips: Strips with a chemical reagent system used with the
meter to measure glucose concentration in blood.
3. Code Chip: Automatically calibrates the meter with the code number
when inserted into the meter.
4. Lancing Device: Used with sterile lancets to prick the fingertip, palm
(at the base of the thumb) or forearm for blood sample collection.
The packaged lancing device has multiple depth settings, allowing
users to adjust the depth of the puncture and minimize discomfort. It
can also eject the used lancets.
5. Clear Cap: Used with the lancing device and sterile lancet to draw a
blood sample from the forearm and palm.
6. Sterile Lancets: Used with the lancing device to draw a blood
sample. Sterile lancets are inserted into the lancing device with
each blood draw and discarded after use.
7. Control Solution: Verifies the proper operation of the blood glucose
monitoring system by checking the test strips and meter against a
pre-calibrated control solution. Control Solution 1 is all you need
most of the time. If you want to do additional levels of tests, Control
Solution 2 are available. Control 1 and 2 are available in the On
®
Call Advanced Control Solution package which is sold separately.
8. Carrying Case: Provides portability for blood glucose testing
wherever you go.
9. User's Manual: Provides detailed instructions on using the blood
glucose monitoring system.
10. Quick Reference Guide: Provides a brief overview of the blood
glucose monitoring system and testing procedures. This small guide
can be kept in your carrying case.
11. Quick Start Guide: A short set of instructions to get you started
testing with your new system.
12. Logbook: Allows users to record their blood glucose data and get a
better picture of their broader trends.
13. Warranty Card: Should be completed and returned to the distributor
to qualify for the 5-year meter warranty.
En
1 2
Test Strips
Blood Glucose Meter
Code Chip
Carrying Case
Lancing Device
Clear Cap
5
4
3
To Next Page
Loading...
