Acorn CB200 - CB200 Panel Enhancements

Written by: R Patel Checked by: AJC
Document No.: CBAPP Rev.: 7 Page 8 of 11 Date: 06/06/2003
4.2 Typical Repeater Wiring Schematic
5. CB200 Panel Enhancements
The CB200 panel may be enhanced to provide additional facilities. The following table
lists compatible panel enhancement products. Other relevant documentation is available
providing more details.
5.1 Panel Enhancement Order Codes & Descriptions
Part No Descript
ion
2500/032
C1437 4 way alarm extender board - separate PSU required
2500/034
A1466 1 x double pole relay board (1A contacts)
2500/233
Heavy duty relay boxed (suppressed) – additional power supply required
(2500/197 or 2500/198 as appropriate)
2
500/220
Enclosure c/w 1A PSU & space for 4 x C1437 and 2 x A1466 & 6.2AH
battery set Cabinet size - 380h x 600w x 210d
2
500/221
Enclosure c/w 3A PSU & space for 2 x C1324 or 4 x C1437 boards
Cabinet size - 380h x 600w x 210d
2
500/222
Enclosure c/w 5A PSU & space for 2 x C1324 or 4 x C1437 boards
Cabinet size - 380h x 600w x 210d
5.2 Battery Sizes (YUASA)
The CB200 panel has been designed to house the 2.1AH battery set. The following
batteries are suitable for any relevant expansion items, along with auxiliary power
supplies, and should be selected accordingly.
Battery Rating Battery Size
3.2AH battery 12V 134 length x 67 wide x 64 high
6.2AH battery 12V 151 length x 65 wide x 97.5 high
12AH battery 12V 151 length x 98 wide x 97.5 high
15AH battery 12V 181 length x 98 wide x 167 high
CIRCUITS
AL2- AL2+ AL1- AL1+
1234
ON
RA0
RA1
Z1NL
NU
ZONE 8
Z8- Z8+
ZONE 1
Z1- Z1+
REPEATER
B A SCN
AUX
24V 0V
REPEATER
CONFIGURATION
DIL SWITCHES
ZONE 1 NON-LATCH
MODE ENABLE
CB200 4/8 ZONE PANEL
MOTHERBOARD
SPARE SWITCH
NOT USED
CIRCUITS
AL2- AL2+ AL1- AL1+
1234
ON
RA0
RA1
Z1NL
NU
ZONE 8
Z8- Z8+
ZONE 1
Z1- Z1+
REPEATER
B A SCN
AUX
24V 0V
REPEATER
ADDRESS
DIL SWITCHES
CB200 4/8 ZONE REPEATER
MOTHERBOARD
SPARE
SWITCHES
NOT USED
TO NEXT
REPEATER
www.acornfiresecurity.com