Acqiris SA240P - SA240 P Front Panel Features

1.1 SA240P front panel features
Acqiris SA240P User's Manual 9
1.1 SA240P front panel features
Front panel connectors
Connector Type Description
TRG IN
MMCX
female
External trigger input, 50 Ω DC terminated, ± 5 V range.
IN 1, 2
SMA
female
Analog signal inputs, DC-coupled and 50 Ω terminated. The input full scale
ranges are selectable:
Voltage 500 mV FSR 1 V FSR
Recommended maximum
operating voltage
± 600 mVpk ± 1.2 Vpk
TRGOUT
1
MMCX
Trigger Out signal (programmable).
50Ω source, LVCMOS 3.3V
I/O 1, 2, 3
MMCX
User configurable digital Input / Output signal.
DC coupling, LVCMOS 3.3 V.
Output: 50Ω source, Input: +5V max.
REF IN
MMCX
External reference clock input, AC coupled and 50 Ω terminated.
It can accept a 10MHz or a 100 MHz signal from -3 to +3 dBm.
Table 1.1 - List of SA240P front-panel IOs.
The ADC card can usually work with signal present at the external reference input (REF IN).
However, to ensure the best performance, or if the calibration is found to be unreliable, it is
recommended to remove such signals when working with internal clock.
1
The trigger out connector depends on the product version.