10.4 Electrical &environmental specifications
Acqiris SA240P User's Manual 87
This product complies with the WEEE Directive marketing requirement. The affixed product label (above)
indicates that you must not discard this electrical/electronic product in domestic household waste. Product
Category: With reference to the equipment types in the WEEE directive Annex 1, this product is classified as
“Monitoring and Control instrumentation” product. To return unwanted products, contact your local Acqiris
office.
This symbol indicates the time period during which no hazardous or toxic substance elements are expected to
leak or deteriorate during normal use. Forty years is the expected useful life of the product.
This symbol indicates the card is sensitive to electrostatic discharge (ESD). ESD can damage the highly
sensitive components in your card. ESD damage is most likely to occur as the module is being installed or when
cables are connected or disconnected. Protect the circuits from ESD damage by wearing a grounding strap that
provides a low resistance path to ground. Alternatively, ground yourself to discharge any built-up static charge
by touching the outer shell of any grounded instrument chassis before touching the port connectors.
This symbol denotes a hot surface. The side cover of the module will be hot after use and should be allowed to
cool for several minutes.
10.4 Electrical & environmental specifications
For full specifications, please refer to the SA240P datasheet.
10.5 Related documentation
All documentation relating to your ADC card may be found from https://extranet.acqiris.com/.
If you have run the Acqiris MD3 software installer on your PC, the related product documentation
has been installed to your hard drive.
To Next Page
Loading...