Acrel ACR10R Series User Manual

`
- 26 -
1043-1045
Second way transmission
R/W
3
1046-1048
Third way transmission
R/W
3
1049-1051
Fourth way transmission
R/W
3
1100-1102
DLT/645 address
R/W
3
1103
Second way communication
speed
R/W
0--4800bps； 4--2400bps
1--9600bps; 5--1200bps
2--19200bps；
3--38400bps(default communication
speed).
1
1104
Second way communication
calibration mode
R/W
0--no calibration bit(default mode);
1--odd calibration bit;
2--even calibration bit.
3--2 bits
1
1200-1211
Time interval 1 parameter
R/W
Time interval 1 has 8 time periods; each time
period takes 1.5 character, the first byte
being time, second byte being minute, third
byte being rate type, four rates separately
being 0-tip, 1-peak, 2-flat, 3-trough
27
1212-1225
Time interval 2 parameter
Time interval 1 has 9 time periods; each time
period takes 1.5 character, the first byte
being time, second byte being minute, third
byte being rate type, four rates separately
being 0-tip, 1-peak, 2-flat, 3-trough
1225-1226
Time interval type selection
1225 low 8 bit being January-August time
interval selection, eighth bit being January
time interval selection, (0: select time interval
1, 1: select time interval 2), in the similar
manner, bit 1being August time interval
selection; 1226 high 4 bit
September-December time interval
selection, bit 16 being September time
interval selection, in the similar manner, bit
13 being December time interval selection
(0: select time interval 1, 1: select time
interval 2)
1250-1251
Historical active tip electric
RO
Secondary electric energy, 2-bit decimal
2

Acrel ACR10R Series Specifications

General

Model	ACR10R series
Communication	RS485, Modbus-RTU
Protection	IP20
Display	LCD
Power Supply	AC/DC
Rated Current	AC 1A, AC 5A
Frequency	45Hz - 65Hz
Accuracy class	0.5
Power consumption	<5VA
Operating temperature	+55°C
Storage temperature	-25℃~+70℃
Safety	IEC/EN 61010-1
EMC	IEC 61326-1
Relative Humidity	≤95% (non-condensing)
Voltage overload	1.2x rated voltage continuously, 2x rated voltage for 1 second