24
months, more than or equal to
this month, is the multi-rate of
last year
正反向功率、电流需量
Positive and reverse power and current demand
正向功率需量
Positive power demand
当前月的正向功率需量,其他类推
The current month's positive power
demand, and other is similar
需量发生日期(月、日)
Demand occurrence date
(month, day)
高字节高四位为年,低
4
位为月
High 4 bits are year, lower 4 bits are month
in high byte
需量发生时间(时、分)
Demand occurrence time
(hour, minute)
依次为
1-12
月的正向功率需量记录
1-12 month’s positive power demand
records in turn
反向功率需量
Reverse power demand
依次为当前及 1-12 月反向功率需量记录
Current and 1-12 month’s reverse power
demand records in turn
正向电流需量
Positive current demand
依次为当前及
1-12
月正向电流需量记录
Current and 1-12 month’s positive current
demand records in turn
反向电流需量
Reverse current demand
依次为当前及
1-12
月反向电流需量记录
Current and 1-12 month’s reverse current
demand records in turn
开关量动作事件记录
Event record of switch action
最新一次的开关量事件位置
The latest switch event
location
0-9 依次循环,如果为 0 即 2460 地址,1
对应
2465
地址,依次类推。
0-9 cycles in turn, 0 is the address of 2460,
1 is the address of 2465, and so on
开关量事件记录 1
Switch event record 1
1.开关量动作记录,bit15 为 1 表示闭合,
为
0
表示断开;
bit12-bit8
为
1
表示
DO,
为 3 表示 DI,低 8 位为 1 表示第 1 路
例:
0x8102,
表示第
2
路
DO
闭合,
0x0102,
表示第 2 路 DO 断开。
2.
动作时的告警状态,见告警状态寄存器
1.Switching action record, bit15 is 1 means
closed, 0 means disconnected; bit12-bit8 is
1 means DO, 3 means DI, and lower 8 bit
is 1 means 1st way. For example: 0x8102
开关量事件时报警状态
Alarm status at switching
events
开关量事件(年月)
Switch event (Year、month)
开关量事件(日时)
Switch event (Day、hour)