With this function, you can check what rules are currently set in the clock.
Push the [SETTING START/END] button before you start setting. At that moment,
" " is indicated on a display and you go into setting mode.
1
Push the [SETTING INFO.] button
for two seconds.At that moment,
"IP" is indicated on the left side of
the display.
3
Once list printing is completed,
"date" and "time" are indicated on
the display and the colon starts
flashing. Then replace the cover
and lock.
2
Insert a blank time card and a list is
printed out.
If you want to stop printing, push
the
[SETTING START/END]
button.
65
AM
Date
Colon
7. Printing List of Program Settings
Page No.
Total Pages
59
To Next Page
Loading...
