ACTi E918 - Page 11

www.acti.com
Hardware Manual
11
Item
Description
2
Audio Input
Connects to audio input devices, such as a microphone with
built-in amplifier, etc. See How to Connect Audio In Device on
page 30 for more information.
NOTE: The microphone must have a built-in amplifier.
Connecting an ordinary microphone will dwarf sounds and will
result in inaudible recording.
3
Ethernet Port
(RJ-45)
Connects to a network using an Ethernet cable with RJ-45
connector.
4
Reset Button
Restores the factory default settings of the camera. To reset the
camera, while the power is on, press and hold the Reset Button
for at least 5 seconds or until the Blue LED lights up.
5
Memory Card Slot
Insert a memory card (not included) into the slot for local
recording purposes. See How to Install / Remove the Memory
Card on page 26 for more information.
NOTE:
 E936 supports microSDHC cards only
 Other models support microSDHC and microSDXC
cards