Hardware Manual
26
Other Adjustments and Accessories
How to Install / Remove the Memory Card
NOTE:
E936, E936M supports microSDHC cards only.
The rest of the models support microSDHC and microSDXC cards.
How to Insert the Memory Card
1. Loosen the three (3) screws to remove the dome cover.
2. Insert the memory card into the card slot with the metal contacts facing the bottom side of the
camera.
3. Push the card completely until it clicks into place.
4. Attach the dome cover to the camera and tighten the three (3) screws.
How to Remove the Memory Card
In case there is a need to remove the card, make sure to access the camera Web Configurator to
safely “unmount” the card first (see the camera Firmware User’s Manual for more information).
Once unmounted from the firmware, push the card to eject it from the slot.
To Next Page
Loading...
