ACTi KCM-8211 - How to Waterproof the Cable Using the Conduit Gland

www.acti.com
Hardware Manual
22
How to Waterproof the Cable Using the Conduit Gland
1. Prepare the following items:
Cable Gland
Gland Rubber Ring
1/2” Flexible Conduit
Waterproof Tape
NOTE: The washer
will not be used in this
installation, please set
it aside.
NOTE: Not included
in the camera
package.
NOTE: Not included
in the camera
package.
2. Detach the conduit gland as shown below.
3. Insert the Ethernet cable through the flexible conduit. Then insert the clamping nut through
the flexible conduit.
Gland Body
Clamping Nut
Sealing Rubber
Washer