ACTi Z41 - Physical Description

www.acti.com
Hardware Manual
8
Physical Description
Item
Description
1
DC 12V Power
Input
In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to an
external power adapter (not included). See Using a Power
Adapter (Optional) on page 15 for more information.
2
Ethernet Port
Connects to a network using an Ethernet cable with RJ-45
connector.
3
Memory Card Slot
Insert a memory card (not included) into the slot for local
recording purposes.
5