ACT550 USER MANUAL
480258EN-1.0 29/06/2016 Page 10 of 34
POL.
C/ CALIDAD, 66
28906 GETAFE
Tel: +34 91 665 26 26
Fax: +34 91 665 23 24
N.I.F. ES-A-28905065
ER-
4.4. Tune and Memorize the Best Stations
This function performs a scan of the selected frequency band and memorizes the best stations in the
6-position memory.
With the source Radio selected:
1. Press and hold [SRC] to access the "Radio Settings" menu
2. Press the [VOLUME] knob repeatedly to select "AUTO MEM SCAN"
3. Press [ ] to start the stations scan and memorization process
Press [ ] to stop the process at any time.
4.5. Radio Stations Memory Management
With the Radio source selected:
Memorize a tuned radio station: press and hold any memory button [1] to [6] (or the keys [1] to
[6] on the remote control).
Select a memorized radio station: press [1] to [6] (or the keys [1] to [6] on the remote control)
corresponding to the memory where the radio station is memorized.
Note!
LCD screen will display the number of the selected memory along with the frequency of the radio
station.
4.6. RDS Functions
With the Radio source selected and the RDS system activated (refer to Section 4.7, Radio Settings):
AF Function: press [TA/AF] to activate or deactivate automatic retune to alternative frequencies.
TA Function: press and hold [TA/AF] to enable or disable the search for stations broadcasting
news and traffic announcements.
and/or icons light up on the LCD screen when the corresponding function is ON.
RDS System
The radio data system (RDS) provides additional information relating to an FM radio station.
AF Function
In case of loss of signal from a FM station, the AF
function searches for an alternative frequency
for the same FM station. If after a while, it has not located an alternative frequency the search
stops automatically.
TA Function
It allows searching a station broadcasting traffic news or announcements.
To Next Page
Loading...