ACT550 USER MANUAL
480258EN-1.0 29/06/2016 Page 15 of 34
POL.
C/ CALIDAD, 66
28906 GETAFE
Tel: +34 91 665 26 26
Fax: +34 91 665 23 24
N.I.F. ES-A-28905065
ER-
5.2. Content Selection
With the USB or SD Card source selected:
1. Press [ ] (or [MENU] on the remote control) to enter the content selection menu
2. Press [ ] repeatedly (or [MENU] on the remote control) to surf through the various levels of the
contents of the device:
USB and SD Card:
1. List of files
2. List of folders
3. Type of content to play: AUDIO, IMAGE or VIDEO.
iPod: multimedia library
3. Use [ / ] keys and/or the [VOLUME] knob, (or keys on the remote control) to select
the level and file to be played.
The control [VOLUME]
will be only available if there is an external screen associated to the
driver zone and the parameter is activated.
4. Press [ ] / [VOLUME] (or [ENTER] on the remote control) to play the selected item.
Note!
By default, the LCD screen displays
the content selection menu of the equipment. If an external
screen is available, associated with an area (driver or passenger) where the USB or SD Card is
selected, the content selection menu is displayed on that screen.
Note!
To use an external screen associated with the driver zone, it is necessary to enable the
Monitor parameter (refer to Section 10, General Settings)
Note!
If playing a video and an external screen associated with the driver zone is available, the driver
screen will turn off after a few seconds from the start of playback.
Note!
The selection of content from a device type
iPod is only possible if an external display associated
to any area is available or if it is allowed by the device interface.
To Next Page
Loading...