3. Follow the instructions in the “Set Up/Configuration” screen, then click Begin
Basic Setup.
4. In the next screen, follow the on-screen instructions, then click Next.
5. In the next screen, select the type of connection provided by the ISP by
clicking in the circle next to PPPoA or PPPoE. If unsure about the selection,
check the information provided by the ISP. Then, enter the User Name and
Password provided by the ISP in the appropriate text boxes. If no user name
or password is needed, click in the box next to “My ISP does not require a
username and password.” Click Next.
To Next Page
Loading...
