MyWirelessTV Receiver
e MyWirelessTV Receiver features three ports (Power, HDMI Out,
USB), two buttons (Sync, Reset), and three LEDs (Wireless, Sync, Power).
Receiver Front Panel
Wireless LED e Wireless LED, located on the front of the Receiver, is
used to display the state of the Receiver’s wireless signal. If unlit, the
wireless radio is not on. If lit, the wireless radio is on.
Sync LED e Sync LED, located on the front of the Receiver, is used to
display the state of synchronization between the Receivers and
Transmitter. If it is blinking or o, the Receiver is not synchronized
with any receivers. If it is glowing steadily, synchronization has been
established with at least one Transmitter.
Sync Button e Sync button, located on the front of the Receiver, is
used set up synchronization with a Transmitter.
MyWirelessTV User Manual
9
To Next Page
Loading...
Need help?
General
