Transmitter Rear Panel
Power Port e Power port, located on the back of the Transmitter, is
used to connect the Power cord to the Transmitter.
HDMI Input Port e HDMI Input port, located on the back of the
Transmitter, is used, via an HDMI cable, to connect the Transmitter to
an HDMI source (set top box, Blu-ray player, gaming console, etc.).
HDMI Passthrough Port e HDMI Passthrough (Out to TV) port,
located on the back of the Transmitter, is used, via an HDMI cable, to
connect the Transmitter to a local HDTV to allow continued video
viewing on the monitor located nearest to the Transmitter.
IR Transmit Port e IR Transmit port, located on the back of the
Transmitter, is used to connect the IR Blaster cable to the Transmitter,
enabling the use of the source device remote control in tandem with
MyWirelessTV.
MyWirelessTV User Manual
8
To Next Page
Loading...
Need help?
General
