WARNING! - Do not operate this unit without the rear
lint screen AND back cover installed.
CAUTION! - Disconnect power cord before servicing.
CAUTION! - The Away Mode feature of this unit is to
be operated in unoccupied areas only.
Introduction...................................... 2
Specifications .................................... 2
Your New AP3000 by activTek ....................... 3
Inspection & Installation ........................... 3
Unit Features..................................... 3
Operation ....................................... 4
Placement of Unit................................. 4
Settings & Adjustments ............................ 5
LCD Display...................................... 5
Maintenance Reminders ........................... 6
General Maintenance.............................. 6
Optional Prefilter ................................. 7
Removing the Rear Lint Screen...................... 8
Removing the Purifier Plate & ActivePure (RCI) Cell..... 8
Installing the ActivePure (RCI) Cell & Purifier Plate...... 9
Installing the Rear Lint Screen....................... 9
Troubleshooting ................................. 10
Warranty Information ............................. 11
Replacement Parts List............................ 12
FCC Declaration of Conformity..................... 12
INTRODUCTION
Congratulations, you have purchased one of the most
effective, technologically advanced air purifiers available.
Your new AP3000 by activTek is designed to provide
years of trouble-free, low maintenance operation. Be
sure to read and follow all service procedures outlined
in this owner’s manual, and use only genuine activTek
replacement parts available from your activTek
Distributor.
If you have any questions concerning this, or any
activTek
product, contact your
activTek Distributor
.
Please record the name and phone number of your
activTek Distributor:
Name _____________________________________________
Phone _____________________________________________
Please record the serial number of your
AP3000 by activTek:
Serial # ____________________________________________
Electrical:
• 100 ~ 240 VAC 50/60 Hz External Power Supply
• 50 watts maximum power consumption
• Negative Ion Generation
Size:
• Dimensions:
12” high x 9” wide x 12” deep
• Weight: 16 pounds
Purification Plate Output
(High Mode):
• 0.05 ppm
Coverage:
• Covers a range of 250 ft
2
(23 m
2
) to 3000 ft
2
(279 m
2
)**
** Depends on variables such as severity and frequency of
pollution, humidity, and temperature
Warranty:
• Three (3) Year Limited Warranty
See page 11 for specific details
SPECIFICATIONS
This user guide is also available online at: http://www.activTek.net
2
CONTENTS
CAUTION! - Do not operate unit near heat sources,
open flame, or combustible vapors or gases.
To Next Page
Loading...
