AP3000
1. Remove protective packaging
2. Remove unit from shipping carton
3. Remove all protective materials
4. Check for shipping damage and loose or broken parts
5. Read owner’s manual thoroughly prior to installation
6. Install batteries in remote
7. Determine placement location for the unit (See
“Placement of Unit” on page 4)
8. Insert the power supply plug into the power receptacle
on the rear of the unit. Plug the appropriate cord into
the power supply and into a working electrical outlet
9. Using either the remote control or the Power button,
turn the unit ON
INSPECTION & INSTALLATION
YOUR NEW AP3000 BY activTek
• Eliminates smoke, odors, and tobacco smoke
• Includes ActivePure (RCI) Technology
• High-intensity UV lamp
• Removes odors from a home, office, car,
boat, RV, etc
• Improves the quality of air indoors,
up to 3000 ft
2
(279 m
2
)
• Customizable to your environment, using the
included remote
• Maintenance reminders alert you when normal
maintenance needs to be performed or service is
required
• Exclusive ActivePure (RCI) Technology
• Needlepoint and RF Ion Generation
• Five Speed Fan (Remote Only)
• Reset (Manual Operation)
• Adjustable Purifier Control (High Mode - Remote Only)
• LCD Display
• Away Mode Function w/Adjustable Digital Timer
(Remote Only)
• Maintenance Reminders
• Washable Purification Plate
• Washable Rear Lint Screen
• Replaceable ActivePure (RCI) Cell
• Removable Front Grill
• Universal Power Supply with Two (2) Cords
UNIT FEATURES
Back of Unit/
Rear Access
Power Cord
Receptacle
LCD Display Removable Grill
3
Power
Supply
Power Supply
Plug
Cords (2)
To Next Page
Loading...
