Ascender
Positioning Point
Correct use
Note
This setup can be used in cases where the
Ascender is rigged to an anchor and the operator
wishes to avoid the Ascender dropping when the
rope becomes unloaded. However, the Ascender
must be allowed to rotate freely while suspended.
Do not use the Ascender Positioning Point as an
anchor extension for making pulley systems as
thiswould risk double-loading the frame plate,
Sling Bolt and Connection Sling with the risk
of having an insuffi cient factor of safety on the
Connection Sling.
DANGER
27
To Next Page
Loading...
