ActSafe ACX - Checklist before use

Always check the Ascender before
every use. Check the Ascender
thoroughly and in accordance with
your training and this manual.
If you are in any doubt about
the condition of the Ascender, do
not use it and contact your ActSafe
supplier or ActSafe directly.
Inspection of ACX Battery Pack
» No damage to Battery Housing
» Connector pins clean and
not damaged
» Battery charged
» Battery Strap present
Inspection of ACX Ascender
» Check the Ascender housing
for cracks or severe damage
» Check the Battery Connector
pins on the Ascender:
– Clean and no damage
– Rubber sealing rings should
be present (see below)
» Slide the Battery on to the
Ascender and check that the
Battery is locked in its position
F.11 CHECKLIST BEFORE USE
Rubber sealing ring
56